Magnetic separator

Magnetic separator

The wet-type drum permanent magnetic separator is mainly suitable for wet separating of the following ores with the sizes less than 3mm, which are magnetite, magnetic pyrite, baking ore, ilmenite and so on. It also can be used for removing Fe procession of coal, nonmetallic mineral and construction materials. According to the customer requirements, we can provide fair current and semi-counter-current types separator with different magnetic strength. And it has advantages of high capacity, easy operation and simple structure.

+86 15921691515 Email:sales@jxjq.com

Single Introduction

Introduction
Magnetic separator Magnetic separator Magnetic separator

Working Principle

It mainly consists of magnetic , drum, separation trough, gearing, and feeding , discharging ,and overflowing device.

According to the different specific susceptibility, it makes use of magnetic force to separating the various minerals. When the pulp ores enter into separation area, the strong magnetic minerals will be absorbed on the surface of the drum under the force of the magnetic fields, and then be leaded into the Concentrates mouth along the rotary of the drum. As been away of the magnetic system, it will be discharged into concentrated trunk by the water, At the same time, the matrix and the weak magnetic minerals will inflow the tailings discharging mouth against the rotation direction of the cylinder, under the flow of the pulp ore in the tank.

This type of the wet permanent magnet drum is mainly suitable for wet separating of the following ores with the sizes less than 3mm, which are magnetite, magnetic pyrite, baking ore, ilmenite and so on. It also can be used to remove the iron for processing of coal, nonmetallic mineral and construction materials. The magnetic system of the magnetic separator is made by compositive materials of high quality ferrite materials and rare earth magnetic steel and the magnetic induction is 100-600mt, We can produce the magnetic separator into uniflow, semi-counter current and reflux type, This magnetic separator has the advantage if high capacity, easy to control and simple structure.

CTB is mainly suitable for rough wet separating and scavenging with the size between0.5-0mm,especially for concentrating large ore with the size between 0.15-0mm.

CTN is mainly suitable for rough wet separating and scavenging with the size of the strong magnetic mineral between0.6-0mm,especially for recycling the heavy-medium in coal washery.

CTS is mainly suitable for rough separating and concentrating with the size between 6-0mm

Main Technical Parameters 


Model
Cylinder
Cylinder length
(mm)

Rotary speed of cylinder
(r/min)

Capacity
t/h

Feeding size
(mm)

Power
(kw)

Weight
(kg)
CTB612
CTS612
6001200﹤3510~202~01.51445
CTB618
CTS618
6001800﹤3515~302~02.21655
CTB718
CTS718
7501800﹤3520~452~02..21992
CTB918
CTS918
9001800﹤3540~603~033162
CTB921
CTS921
9002100﹤3545~603~033475
CTB924
CTS924
9002400﹤2845-703~043887
CTB1018
CTS1018
10501800﹤2050-753~05.53801
CTB1021
CTS1021
10502100﹤2050-1003~05.54095
CTB1024
CTS1024
10502400﹤2060-1203~05.54319
CTB1218
CTS1218
12001800﹤1880-1403~05.55263
CTB1224
CTS1224
12002400﹤1885-1803~07.55927
CTB1230
CTS1230
12003000﹤18100-1803~07.56325